ISS45      Release Table
     

Name of Link:  FTP Site for 8.1.2.1-080-090 Patch
  Code Distribution:   This release will be automatically applied to stores with the StoreNext Code Distribution System.
  POSTing Date:  21-Mar-08

ISS45 Version 8.1.2.1-080-090 Release Table

Last updated March 21, 2008

See the Release Table below for a description of this planned release.

PLEASE NOTE: The new  fuel moduleCL2PumpSrv version 4.1.16.777  must be loaded in conjunction with the ISS45 8.1.2.1-080-090 software release in order to have a complete successful fuel environment.

This table below describes the current plan for the new features and faults to be addressed in this scheduled software release.

Printing Instructions: many browsers do not support correct color and format printing directly from the Web.  For best results, with your cursor highlight the section of the table you wish to print and copy to the clipboard.  Then paste from the clipboard into a blank Word document and print the Word document to a color printer.

Enhancement or Fault Number

Item  Description
WD 10122 Fuel - Randomly, pay-at-pump transactions are not finalizing. These transactions go up for pre-authorization, but do not go up for completion. This issue was caused by the ANDI box not blocking scanner after first swipe of loyalty card. If customer swiped card twice during same transaction then order would not finalize.
WD 10143 Fuel - A car wash purchased at the pump does not reflect into store sales, only the media is reflected
WD 10152 The file name format for the EBT WIC Claim Report is not correct if the Julian day is lower than 100
Scenario:
1.Create a EBT WIC Claim report for any day between January 1 and April 8


Expected Results: The file name format will be 4 digit state EBT ID number and 4 digit date with the first digit being the year and the last three digits being the day of the year with a leading 0 (8017 for January 17).

Actual Results: The file name will be 4 digit state EBT ID number and a 3 digit date (817 for January 17).
WD 10262

ECC not working with U-Scan

Scenario:

1. At the Customer Station, ring a transaction for $90.99

2. Hit pay and select other tender, it will send you to the Attendant Station

3. From the ISS45 screen select ECC check payment for amount of transaction

4. Follow the prompt on the screen until payment is complete

Expected Results: Raw MICR data send to WinEPS

Actual Results: Raw MICR data is not being send to WinEPS

Note: ISS45 was acknowledging the receipt of Message 148 of the Raw Data from the Attendant Station. However, ISS45 was not gathering the Raw Data and pushing through to WinEPS