Enhancement or Fault Number

Item  Description

Cashier Declaration Report prints wrong data if printed immediately after performing the declaration

"5 Invalid procedure call or argument" when save PLU Selection Criteria.  Must have no records to reproduce. 

Scenario:

1. General System Parameters - Store/Front Office/PLU and Batch/Operation/Allow Ordering of PLU Selection Criteria=Yes

2. PLU Management - PLU Selection Criteria

3. Click Save PLU Selection Criteria

Expected Results: Does nothing if no existing records. 

Actual Results: Error message.

The Daily Paid Out Report that is generated during EOD is blank on SQL Workgroup systems 

Scenario:

1.Set up system with MFS1 running on Windows XP Professional and SQL Workgroup

2.Ring up several Paid Outs on the register

3.Verify Paid Outs show up in EJ and on the cashier report

4.Run end of day on mfs1

5.Check the Daily Pick Up Report in the EOD Log and History Reports 

Expected Results: Paid Outs done on the lane will show up on the report 

Actual Results: Report is blank - works properly on Windows 2000 Server

WD 9238

 Can not install Solidcore on any LFS

Scenario:

1. Start install of Solidcore on an LFS

2. The install will fail because there is no software key and there is no bit set in POSCONF.QDX

    for Solidcore

3. The software key issue is not a problem since an LFS will never have a software key

4. The problem is that the POSCONF.QDX file on an LFS is, by default, set to 2 records,

    this should be increased to 10 records by default

5. With the record count set to 10, when POSCONF.QDX get created, records 3 - 10 will

    be populated with C0's and the proper bit will be set to a '1' for Solidcore 

Expected Results: Solidcore can be installed on an LFS without a software key

Cashier Locking To File Not Producing File

Scenario:

1. Ring in sales for a cashier

2. Go into Cashier Locking in Front Office

3. Select cashier

4. For Destination select File

5. Press OK

Expected Results: A file(s) should be produced with all the locking information 

Actual Results: No file(s) are created

Saving and Recalling an order with a Delayed Promo does not discount correctly

Scenario:

1. Set up an Enhanced Delayed Member Promotion linked by Department.

Set Group Type = Units

Reward Type = Percent Off Order

Reward = 10.000

Member Card Required 

2. Ring 5.00 grocery

Press ENTER to total.

Promo discount reduces transaction by .50. Total is 4.50.

Press CLEAR to return to item entry.

Ring 6.00 produce.

Press ENTER to total.

Promo discount reduces transaction by .60. Total is 9.90.

Press CLEAR to return to item entry.

Press SAVE.

Press RECALL and recall transaction Total is 9.90

Press CLEAR to return to item entry.

Press ENTER to total. Total is still 9.90.

Press CLEAR to return to item entry.

Ring 2.00 dairy.

Press ENTER to total.

Promo discount reduces transaction by 1.19. Total is 10.71. Promo should only have taken off an additional .20 resulting in a total of 11.70. 

Expected Results: Total should have been 11.70

Scenario:

1.Build a Delayed Level Promotion with Group Type = Units and Reward Type = Cash

   Set Level 1 Quantity = 2 and Reward = 1.00 and attach a 1 dollar item to the promotion

2.Ring in 2 of the items and than press Total and the 1 dollar will be subtracted

3.Press Clear and than void 1 of the 2 items and the subtotal changes to 0.00

   Press Total again and the balance changes to -1 dollar

   Press Clear and Total again and the balance changes to 1 dollar 

Expected Results: Transaction Total should be 1 dollar 

Actual Results: 3 different Balance Due amounts

WD 10124

U-Scan

The signature is captured correctly on the PIN pad if Store\POST\general\display captured signature on cashier display with accept or reject is No.  If you have Yes for the setting, the signature will not be captured on U-Scan and the signature copy will print at the attendant station.

Set Store\POST\general\display captured signature on cashier display with accept or reject to Yes.

Ring an order at the U-Scan customer station running with a PIN pad 4100 or 4250

Select Pay Now and tender with Credit

Slide your credit card when prompted

Sign the PIN pad when displayed

The U-Scan Attendant station flashes to confirm the signature (Go into direct mode)

Select Yes to confirm the signature displayed

The signature from the PIN pad is not captured and the signature copy to sign is then printed at the attendant station.

Expected Results: Signature capture should work with the display signature at cashier display with accept or reject set to Yes

Actual Results:  If set to Yes, the signature will be rejected and a printed credit receipt is printed to sign at the attendant station

Incorrect Bonus Buy Saving messages may print for weighted items if item is set up to use Price Comparison 

Scenario:

1.Set up an UPC-A item (an example would be 20115800000 ) as a weighted item and a price of 10.78.

2.On the Parameter 2 Tab set up Price Comparison Type = Bonus Buy Savings and a Price of 10.78

3.In General System Parameters set the POST\Presentation\Receipt\Regular Printing\Bonus Buy\PLU Comparison Printing Type = Line and all Print Summary Reports = Yes

4.Ring up the item by entering 20115800838, where 838 equals the embedded price of $8.38.

5.Ring up another of the same items but with embedded price of $9.39 by entering 20115800939. 

Expected Results: Neither item will print a Bonus Buy Savings message because item was sold at regular price 

Actual Results: The first item (20115800838) prints a Bonus Buy Savings message of $0.03 but the second item (20115800939) does not print a savings message.

This appears to be cause due to our method of rounding.

The $8.38 comes from the random weight barcode.  The $10.78 comes from the item price in ISS45.  The .78LB is calculated based on price of item scanned divided by price per pound.

8.38/10.78=.7773

The weight is being rounded on the receipt to .78LB.

It looks like the savings amount was calculated by taking the weight multiplied by price per pound and then subtract the price of the item scanned.

.78 X 10.78=8.4084

This calculated amount is rounded to $8.41.

$8.41-$8.38=$0.03 which is what shows as savings on the T-BONE.  There were no actual savings on the T-BONE.  The price per pound on the meat tag and in ISS45 price and bonus buy fields is identical.

If calculated weight was rounded at 4 decimal places you would have .7773x10.78=8.3792, which would round to 8.38.