ISS45      Release Table
     

Name of Link:  FTP Site for 8.1.4.1-090 Patch
  Code Distribution:   This release is not available for download to stores with the StoreNext Code Distribution System.
  POSTing Date:  10-Dec-09

ISS45 Version 8.1.4.1-090 Release Table

Last updated December 10, 2009

 

See the Release Table below for a description of this planned release.

This table below describes the current plan for the new features and faults to be addressed in this scheduled software release.

Printing Instructions: many browsers do not support correct color and format printing directly from the Web.  For best results, with your cursor highlight the section of the table you wish to print and copy to the clipboard.  Then paste from the clipboard into a blank Word document and print the Word document to a color printer.

Enhancement or Fault Number

Item  Description

New Feature

LaneHawk (Evolution Robotics) Added additional logging capability to the Electronic Journal to allow searching for LaneHawk transactions.

WD 11698

Changing the cashier password causes 3 View tables to fail on the CRC check.

Scenario:

1. Run a PCMCRC to verify you don't have any "Different CRC's". Rebuild any tables to correct any problems you have until you have a good CRC check.

2. Go to the POS and change a cashier password.

3. Now do the CRC check. Notice the following tables now have bad CRC's:

vwEMP, vwEMPL, and vwEMP_SECURE

Expected Results: CRC should not fail after changing or resetting cashier password.

Actual Results: vwEMP, vwEMPL, and vwEMP_SECURE tables fail CRC check after resetting cashier password. THIS CAUSES A CASHIER NOT FOUND ERROR WHEN SIGNING ON.

WD 11973

WD 12099

When a Non-Merchandise Item is voided off, the Sales total on the Cashier Report is reduced by the amount of the void or an Error Correct of a non-merchandize item - will reduce the Cashier Sales Total by double

Example: If error correct $1.00 on non-merchandize the Cashier Sales Total is reduced by $2.00

Scenario:

1) Verify Cashier Report is at 0

2) Ring up 1 Non-Merchandise Item for 1.00

3) Line Void or Item Void the Non-Merchandise Item

4) Check the Cashier Report

Expected Result: Because the item was rung and then voided off, the Sales total on the Cashier Report should remain at 0

Actual Result: The Sales total on the Cashier Report will show as -1.00, the amount of the void of the Non-Merchandise item.

WD 12165

PLU Batches will not apply and return status of ERRORS when the General System Parameter  "Use fast PLU batch execution" is set to NO on version 8.1.4.1-080

Scenario:

1.Set General System Parameter "Use fast PLU batch execution" to NO

2.Build a single item PLU Batch (price or sale or change)

3.Apply batch

Expected Results: Batch will apply as built

Actual Results: Batch does not apply and returns status of ERRORS and 2 errors are written to Windows Event Viewer. Invalid Procedure Call or Argument and Class does not support automation or does not support expected interface