ISS45 8.1.5.1-060 Release Table


	Name of Link:	FTP Site for 8.1.5.1-060 Patch
	Code Distribution:	This release is not available for download to stores with the StoreNext Code Distribution System.
	Posting Date:	September 16, 2010
ISS45 Version 8.1.5.1-060 Release Table Last updated September 16, 2010 See the table below for a description of the new features provided and faults addressed in this release. Information in this table prior to release is provided in order to assist dealers in their planning, and while they are not commitments, this list represents StoreNext's best view at time of posting regarding highly likely new feature content and faults most likely to be addressed. Printing Instructions: many browsers do not support correct color and format printing directly from the Web. For best results, with your cursor highlight the section of the table you wish to print and copy to the clipboard. Then paste from the clipboard into a blank Word document and print the Word document to a color printer.

Enhancement or Fault Number	Item Description
Removed Feature	Remove Weights and Measures changes implemented in 8.1.5.1-050. It has been agreed by the CTEP Program Supervisor, NTEP Administrator and NIST Technical Advisor that the added feature to enforce Stable Zero Weight Display between Scale reads in the software will be allowed to be removed. (CRD 13053 / FSD 13053)
New Feature	M-Dot Free Form Text on Receipt (CRD 13072 / FSD 13072)
WD 12943	M-Dot Network Message 3 not being generated and sent for suspended transactions. Scenario: 1. Enter an M-Dot Network Consumer ID in to a ticket. 2. Sell items that the consumer has offers for. 3. Total the ticket and note that offers should be received and applied to the ticket. 4. Suspend the ticket after totaling it and receiving M-Dot offers. Expected Results: An M-Dot Network Message 3 should be generated and sent to M-Dot Network. Actual Results: No M-Dot Message 3 is generated or sent to M-Dot Network.
WD 13040	M-Dot - PIN pad allows the entry of less than 10 digits and string is used to pass information to PIN pad, data needs to be passed using the phone number message. Scenario: 1. at the pos, scan 1 item 2. now enter consumer ID at the pin pad - enter only 9 numbers. Expected Results: PIN pad give customer error, number too short. Actual Results: consumer ID is accepted.
WD 13057	U-SCAN: Scanning an invalid coupon in direct mode and then scan another item will not display until manual entry. This can be duplicated using the 2nd scenario where the user goes into direct mode and scans an item, then scans an invalid coupon, all items scanned after clearing the invalid coupon message do not appear until a manual item is rung. Scenario: 1. Go into direct mode 2. Scan 1 item 3. Scan invalid coupon 4. Scan several items 5. Manually enter item Expected Results: All scanned items should appear after clearing error condition. Actual Results: Scanned items after clearing an error condition are stored until manual item is entered.
WD 13068	U-SCAN/M-Dot: Can not scan customers card # for M-Dot in direct mode. This feature can only be used in direct mode at this time since there is no way to put a user defined button for a customer on a U-SCAN. The attendant must go into direct mode a use a predefined M-Dot button. The problem is that that M-Dot customer card can not be scanned. It can only be key entered. Scenario: 1. Enter Direct Mode 2. Press Predefined M-Dot key 3. Scan Customer card. Expected Results: Attendant should be able to scan or key enter customers M-Dot #. Actual Results: Attendant can only key enter the customers M-Dot #.