ISS45      ISS45 Release Table
     

Name of Link: 

FTP Site for 8.1.5.4-100

 

Code Distribution:  

This release can now be applied to stores via the StoreNext Code Distribution System.

  Posting Date: 

 December 3, 2012

ISS45 Version 8.1.5.4-100 Release Table

Last updated December 7, 2012

See the table below for a description of the new features provided and faults addressed in this release.  Information in this table prior to release is provided in order to assist dealers in their planning, and while they are not commitments, this list represents StoreNext's best view at time of posting regarding highly likely new feature content and faults most likely to be addressed.

Printing Instructions: many browsers do not support correct color and format printing directly from the Web.  For best results, with your cursor highlight the section of the table you wish to print and copy to the clipboard.  Then paste from the clipboard into a blank Word document and print the Word document to a color printer.

 

Enhancement or Fault Number

Item  Description

New Feature

Support Member Card Number from Fuel with a Check Digit

(CRD 328997 / FSD 328997)

WD 316282

RouteSrv only sends 11 digits for validation on barcode entry at the pump.

Scenario: Scan a barcode with more than 11 digits (usually the check digit) at the pump.

1. RouteSrv should see the card as a member card, assuming it is set up as one.

2. The RouteSrv console returns MediaMasterType=3, this is credit not member.

Expected Results: RouteSrv should allow configuration of variable barcode lengths.

Actual Results: RouteSrv only allows 11 digit barcodes.

WD 325079

If a 13 digit loyalty card is scanned at the pump for a pay inside (PAK), when the ticket is recalled there is invalid data instead of the member card. The problem is seen when sending the member card number we get from PumpSrv to Rtaps:

Scenario:

1. Scan/Key in a 13 digit loyalty card number at the pump (without the check digit) (8009999990010)

WD 325682

Merge Rttrsmng fixes from StoreLine.

WD 325760

Discount type is sent incorrectly from the ISS45 POS to the Pumpsrv - causing Gallon Limits to be ignored

Scenario:

Cents Off Fuel Promotion. Limit 10 Gallons

1. At POS, Scan Member Card

2. Complete PRePay transaction.

3. Activate Pumps and fuel

Expected Results: Fuel pumps until 10 Gallons is reached

Actual Results:Pumps does not stop, discounttype sent by POS is "01", when ut should be '1'

WD 326232

Suppress Print by Checkout Bank does not work with Dynamic Receipt.

With Dynamic Receipt, the option to suppress printing is no longer functional.

Scenario:

1. In GSP, Set Dynamic Receipt parameters on

2. In Checkout Banks, set Suppress Receipt printing to Ask Yes/No

3. At POS on that Checkout Bank, run a transaction

4. When prompted for Print Receipt? Yes/No, Hit No.

Expected Results: Receipt will not print

Actual Results: Receipt Prints

NOTE: Is Suppress Receipt Printing is set to "Always" the receipt will still print

WD 336152

POS crashes with large orders and loyalty card used in the transaction. The crashes happen at the end of the order.

Scenario:

1. Scan a valid loyalty card

2.Ring in 50 or more items, they can be the same or different make sure the total is over 150.00

3.subtotal the order

Expected Results: the order completes and prints

Actual Results: the POsw32 crashes and puts an error on the screen. Upon restarting of the POS application the transaction recovers and allows the order to complete

WD 337152

With Dynamic Receipt, the option to suppress printing is no longer functional.

Scenario:

1. In GSP, Set Dynamic Receipt parameters on

2. In Checkout Banks, set Suppress Receipt printing to Ask Yes/No

3. At POS on that Checkout Bank, run a transaction

4. When prompted for Print Receipt? Yes/No, Hit No.

Expected Results: Receipt will not print

Actual Results: Receipt Prints

NOTE: Is Suppress Receipt Printing is set to "Always" the receipt will still print

WD 344359

Price comparison not being sent to DRE.

Scenario:

1. Set a PLU item to have a price of $2.5. in parameters 2 tab - price comparison, set the type to be: "Bonus Buy Savings", set the price to be $5.00.

2. Turn on DRE.

3. GSP - Store\Post\Presentation\Receipt\Regular printing\Bonus Buy -

PLU comparison Printing type = Summary & Line.

Print Summary report header = Yes

Print Summary report for type 1 = No

Print Summery report for type 2 = Yes

Print Summery report for type 3 = No

Print Summery report for type 4 = No

Print Summery report for type 5 = No

Print Summery report for total = No

Print Summery report Footer = No

Bounos buy savings text for "your Savings today" report = You saved

4. Sell the item you set up.

5. Tender out transaction.

Expected Results: Receipt shouid print with - "you saved on BONUS BUY $2.5. Also, bottom of receipt should print with - you saved $2.5.

Actual Results: When DRE is on Receipt doesn't print "you saved on BONUS BUY $2.5.

Also, bottom of receipt doesn't print "you saved $2.5.

WD 344391

Balance Innovations - 4 issues.

Four issues were found by Balance Innovations after the implementation of the BI code from SL to ISS45.

1. RSMSRV in ISS45 V8 didn't support pgeneral macro call with command 102 (EOD status check)

2. TranRule has bad return codes for RlDeclare2 and RlLock3 functions

3. ConnectToSQL.dll had bad COM reference

4. SalesReport has wrong arguments and output in ISS45 for STP rptCshrDeclr1