ISS45      ISS45 Release Table
     

Name of Link: 

FTP Site for 8180-060

  Code Distribution:  

This release can now be applied to stores via the Retalix Code Distribution System.

  Posting Date: 

Sept 29, 2015

ISS45 Version 8.1.8.0-060 Release Table

Last updated September 28, 2015

NOTE: ISS45 8.1.7.0-150 and later require the ProLogic/YOU Tech/S&H/GreenPoints option to be set on the HASP keys.  ISS45 will not work with Prologic/etc. without HASP key support.

NOTE: ISS45 8.1.7.0-150 and later require the Self-Checkout option to be set on the HASP keys.  The ISS45 system will not work with any self-checkout system without HASP key support.


The table below provides descriptions of the new features provided and faults addressed in this release.  Information prior to this software release is provided in order to assist dealers in their planning, and while they are not commitments, this list represents StoreNext's best view at time of posting regarding highly likely new feature content and faults most likely to be addressed.

Printing Instructions: some browsers may not support correct color and format printing directly from the Web.  You may also highlight the section of the table you wish to print, copy to the clipboard, then paste from the clipboard into a blank word processing document and ouput to a color printer.

Enhancement or Fault Number

Item  Description

New Feature SSCO - DRE support with ISS45 and Loyalty on NCR SSCO.
 
(CRD 435850 / FSD 435850)
New Feature The ability to scan 2-D Barcode Driver’s License to retrieve and record the Driver License #, DL expiration date and Birth Date for States that do not have a mag stripe on the DL from which to collect the data.

(Feature first appeared in 8.1.7.0-190 as CRD 435114)
(ER 811061301 / CRD 435115 / FSD 435115)
Updated Feature The 8.1.8.0-060 patch is being released and has been tested with the following MTX dlls:

Connected Payments:
MTX_EPS.dll - 828.1.11.625
MTX_SE.dll - 828.1.0.3
MTX_POS.dll - 828.1.0.98

WinEPS:
MTX_EPS.dll - 828.0.1.372
MTX_POS.dll - 828.0.1.207
Updated Feature Support of Windows Updates
Windows updates were applied 7/6/2015 to the following system types
MFS1 - Equus Nobilis running Windows 7
POS - Fujitsu 3000 - WePOS
WD 277161 Void Tender on Full Touch cannot complete.
Set up a Tender with the option of Supervisor on Cancel/Subtract turned ON.
System must be FULL touch, no keyboard.
Ring in a sale and partial tender.
Press General Void and an option to Void Tender with the partial amount will be an option.
Select that option.
A Red System box will appear that the Keylock is Invalid, Press C to Continue.
At this point, you are unable to void the tender, you must finalize the sale.
Expected Results: You should be able to Void the tender with a supervisor number and password.
Actual Results: The only option to void the tender requires a keylock change, there is no keylock on Full Touch.
WD 354047 Fuel Transactions were paid out twice causing balancing issues.
Scenario:
1. The issue occurred between 20:21 and 20:27 in the attached transact.qdx file. Cashier #560 on POS #43. POS Transactions #5341 and #5347
2. Fuel transactions #97802, #97804, and #97805
3. In POS Transaction 5341 fuel transactions 97802, 97804, and 97805 where finalized for $128.30. Fuel transaction 97802 was a prepay transaction for $20 dollars that was fully pumped. Fuel transaction 97804 was a PAK for $53.80. Fuel transaction 97805 was a PAK for $74.50
4. Approximately 6 minutes later fuel transactions 97804 and 97805 were finalized again for $128.30 causing the store to be short by this amount.
WD 363435 When doing a cash tender purchase as the first transaction after loading WinPOS, the receipt is blank.
Scenario:
1. Load WinPOS v 8.1.6.0-070
2. Sign on
3. Start a Cash Tender Transaction and finalize
Expected Results: The receipt prints out normal

Actual Results: The receipt is blank.
WD 365853 Swiping a EBT\FS card before voiding the eWIC tender causing the void of eWIC to fail.

1. Use 2 items, one with insufficient benefits available, and one with plenty of benefits available. I used:

Milk $3.49 - eWIC Balance = 1 gal
Eggs $1.00 - eWIC Balance = 999 doz

2. Sell 2 gallons Milk $6.98
3. Sell 1 dozen Eggs $1.00
4. Tender eWIC - Will be approved for $4.49. New Ticket Total = $3.49.
5. SWIPE EBT CASH or FS CARD and get to the PIN prompt.
6. Return to sale and attempt to void eWIC tender.
7. Cancel PIN entry at PIN Pad. You will get an error on the POS that the tender cannot be voided.

At this point, the void of the eWIC tender has failed and the remaining 1 gal Milk benefit is gone. You will see this line in the journal, indicating the error condition:;o.

TCP/IP UIsoio: TRANSACTION FORMAT ERROR >231< Decline not sent to WinEPS
WD 377006 Smart Card WIC: Enhanced group promotion is deducting the free WIC item from the participants benefits.
An enhanced group promotion was put into place where you buy 3 cereals and get a thing of milk for free. A Smart Card WIC member came in and purchased the 3 cereal items on WIC, and should have gotten the milk for free. However, it still deducted the milk from the Smart Card WIC participants benefits.

Scenario:
1. Create a group promo - Buy 3 Cereals, get Milk free
2. Ring the cereals then the milk
3. Pay for the transaction with WIC

Expected Results: The cereals should deduct from the WIC but the milk should be free.

Actual Results: All items are deducted from WIC.
WD 394548 Cosmetic NCR DynaKey Touch - Alignment of the tags (screen wording) for the dynakeys is off.
WD 419430 When using dual sided ncr printer- the reprint transaction function does not work.
Scenario:
1. Ring up transaction, tender, RECEIPT PRINTS FINE
2. Use FUNC 923 Reprint Transaction

Expected Results: Duplicate Receipt Prints

Actual Results: only partial receipt prints> Next transaction prints remaining duplicate receipt.

Scenario:
1. Ring up transaction, tender, RECEIPT PRINTS FINE
2. Use FUNC 1429 Reprint Transaction

Expected Results: Duplicate Receipt Prints

Actual Results: very minimal receipt prints, next transaction remaining receipt print with no cut on new receipt.
(Fix first appeared in 8.1.7.0-190 as WD 411230)
WD 430389 Discrepancy between Store Balance Report and Store Sales Report.

Scenario:

The Taxable Sales value in the Store Balance Report is completely incorrect.

The example below came from a store with 7% sales tax rate. The balance report shows the taxable sales at $69,695.56 but only $3,335.61 collected. That's a $1,543.08 difference.

However, the Taxable Sales value the Store Sales Report works out correctly.

(Fix first appeared in 8.1.7.0-190 as WD 403952)
WD 432026 Large quantity of item(s) in a group promotion is causing POSW32 to crash.

Scenario:
1.Set up item(s) in a group promotion BOGO free
2. Ring up a large quantity of one of the items 300 or 400

Expected Results: Transaction should be completed as normal.

Actual Results: When a large quantity(seems to fall some where between 300 and 400) of one of the items in the promo, it causes a POSW32 crash.

(Fix first appeared in 8.1.7.0-190 as WD 284557)
WD 432423 Keyboard port changed from 0 to 7 after rebooting mfs1. When using touch screen cashier display.

Scenario:
1. Setup pos config per screen shots
2. Reboot mfs1
3. Keyboard port is changed to port 7 after reboot

Expected Results: Keyboard port should remain the same after reboot.
Actual Results: Keyboard port in pos config is changed from 0 to 7 after reboot.
WD 433447 POS - Member Card Entry on Pin Pad is Truncating the last digit of the Member Number.

-Customer "swipes" a member card at the PINPAD
OR
-Customer "manually" enters a 10-digit member card for Loyalty

What is currently happening is when I swipe Member Card #42030000001 on the PINPAD, it is cutting off the ‘1’.
Cashier can still swipe the Member Card at the POS.

Pin Pad type used is L5300
WD 433789 Ohio SmartCard WIC: The script for the EBTWIC_HTTP_CLAIM_FILES table is incorrect for the 8.1.7.0-150 manual patch.

(Fix first appeared in 8.1.7.0-190 as WD 433787)
WD 434369 MDOTProvider.DLL overwrites Chain in <MDOTProvider> section of rsmdispatcher.exe.config with "1".

Scenario:
1. Modify the "Chain" key in the <MDOTProvider> section of c:\pcmaster\drv32\rsmdispatcher.exe.config with a number other than "1".
2. Stop services on MFS
3. Start services on MFS

Expected Results: Chain value will remain the same. Or, ideally, it would read the M-Dot Retailer ID from QDX and write that number for the chain value.

Actual Results: Chain value changes to "1".

(Fix first appeared in 8.1.7.0-190 as WD 433603)
WD 435533 LOYALTY OFF - Full Credit card number is being displayed in the Preferred Customer field of the EJ of the ExtTrs32.log.

Scenario:
1. Swipe a Visa or MasterCard at the Pump
2. Pump Fuel
3. Finalize transaction

Expected Results: Full Credit card number should not be displayed in the EJ of the ExtTrs32.log.

Actual Results: Full Credit card number is being displayed in the EJ of the ExtTrs32.log.
WD 435670 PAK new Tender Discount giving change back/taking wrong amount on Credit Card.

Scenario:
1. At pump, lift nozzle, pump Fuel (Do a PAK).
1. At PFS/POS Scan Member Card #42040000016 (has Stacked Reward Promo).
2. Pull in PAK, get "Do you want to use Rewards?", hit YES. Enter .15˘ off per gallon for Stacked Reward #555.
3. Total with a Credit Card which gives a .10˘ Tender Discount #547. Receipt shows both Stacked and Tender Reward.
4. Pumped $44.19 (11.050 Gal x 3.999 a gallon)
5. Credit Card goes back out to ServerEPS and the final charge on the Credit Card is $42.53 which is the Credit Card should of only been charged $41.42.

11.050 x .10 = 1.11
11.050 x .15 = 1.66
Total Discount = $2.77

Expected Results: The charge on the Credit Card should of been the Tender Discount and Stacked Discount minus the total.

(Fix first appeared in 8.1.7.0-180 as WD 429246)
WD 435697 Gift Card Balance Inquiry not working outside of a transaction when using 'Use Interval Message at End of Order' in Enabled on Servereps. POS must be in a sale (items rung up) to perform balance inquiry with this option on. Turn option off and you can Inquire balance without POS having items rung up in a sale.
WD 437947 Taxable Sales double with more than one tax assigned to department.
When there are more than one tax assigned to a department, the taxable sales are incorrect

Scenario:
1. Assign two taxes to a department
2. Ring up sales in that department
3. Finalize the order
4. Run Store Sales Report and Store Balance Report

Expected Results: Taxable sales shoud be the total of the test order.

Actual Results:Taxable sales number is a combination of the 2 taxes and continues to increase with each order.
WD 438047 The /rxon /rxdll causing service startup to hang potentially.
After upgrading a lab to 8180_050 the upgrade caused application errors on PCMUTL32. Traced it to two lines in the srvstart.bat file. They are:

pcmutl32 /rxdll
pcmutl32 /rxon