ISS45 8.1.8.1-150 Release Table

NOTE: Customers wanting to upgrade to 10.6 LPE and 10.6 LMS should contact their NCR SE for support and PS estimates for the LMS production upgrade estimations..

NOTE: The 8.1.8.0-090 version of ISS45 has been certified for EMV with the VeriFone MX915 and MX860 with Connected Payments 828.7 Gold 24. The MX925 is compatible to the MX915 and is also supported. Please see the release table below for full details.

NOTE: ISS45 8.1.7.0-150 and later require the ProLogic/YOU Tech/S&H/GreenPoints option to be set on the HASP keys. ISS45 will not work with Prologic/etc. without HASP key support.

NOTE: ISS45 8.1.7.0-150 and later require the Self-Checkout option to be set on the HASP keys. The ISS45 system will not work with any self-checkout system without HASP key support.

NOTE: ISS45 Release 8.1.8.0-070 and higher requires a new fuel release that can be found on the FTP Site for 8180-070 Fuel

Information in this table prior to release is provided in order to assist Channel Partners in their planning, and while they are not commitments, this list represents NCR's best view at time of posting regarding highly likely new feature content and faults most likely to be addressed.

Printing Instructions: Many browsers do not support correct color and format printing directly from the Web. For best results, with your cursor highlight the section of the table you wish to print and copy to the clipboard. Then paste from the clipboard into a blank Word document and print the Word document to a color printer.

Enhancement or Fault Number

Item Description

Certification

This Release was certified on the SCO R6L with ADK 6.12

MTX DLL Validation

This release was validated with the following Connected Payments and WinEPS dlls.

Connected Payments: VeriFone: Gold 38

MTX_POS.dll	828.7.0.21
MTX_EPS.dll	828.7.21.82
MTX_SE.dll	828.1.0.3

Equinox: Gold 17

MTX_POS.dll	829.2.0.17
MTX_EPS.dll	829.2.21.69
MTX_SE.dll	828.1.0.3

WinEPS:

MTX_POS.dll	828.1.1.207
MTX_EPS.dll	828.1.1.372
MTX_SE.dll	828.1.0.3

MTX_POS_CPMX.dll	828.7.0.21
MTX_POS_CPEQ.dll	829.2.0.17
MTX_POS_WinEPS.dll	828.1.1.207
MTX_POS_EMPTY.dll	No version

Windows Updates

Windows updates have been applied on 03/26/2019.
MFS1 - Windows 7 Profession SP1
POS – POSReady 7 SP1

Bug
ISS45-1448

Databar Coupons coming up - invalid coupon sale - all include primary company prefix starts with 8.
Using the attached databar.pdf create a UPC item from the examples with 8 as the start of the UPC (company prefix). At register ring up that UPC. Scan the databar barcode that is shown next to the UPC on the databar.pdf. Screen shows Invalid Coupon Sale. Use either of the other examples from the Databar.pdf to see working properly - these have company prefix starting with 5 or 7.

Bug
ISS45-1526

SSCO - After upgrading to 8181-150 unable to sign onto SSCO.

Bug
ISS45-1528

Tendering cash at SCO is locking up the SCO unit.

Bug
ISS45-1530

Round-up feature enabled, the attendant cannot go into assist mode and apply a total time coupon or discount.
(R6-SCO-ADK612-190207-173019) This appears to be a problem with the ADK 6.1.2 version of SSCO Given the Round-up feature is enable in ISS45/ENCOR

Scenario:
1. Ring a sale
2. Press Pay
3. Prompted for Round up total
4. Select Yes or No
5. Attempt to go into Assist Mode to apply a Total time coupon or discount

Attendant can not get to Assist Mode to apply the coupon or discount. The Round-up prompt keeps prompting.


	Link:	FTP Site for 8181-160
	Code Distribution:	This release is available to stores via the Code Distribution System.
	Posting Date:	March 28, 2019