Enhancement or Fault Number

Enhancement or Fault Description

TAR#

XAZBAL5ET/10377

In price mode, the cursor does not automatically go to the Unit Price field.  Now  when you put in an item not in the batch but in the item file, the cursor does not automatically go to the Unit Price field as it did in release 1.2.1. I

Enter a UPC # and make it a FREE ITEM, then SAVE, enter a Random Weight UPC # and it "grays" out the ITEM TYPE.  One  should be able to make the Random Weight a UNIT, STORE COUPON or MFG COUPON. This is only on Random Weight UPC#'s. Version:<\\dalsrv1\Departments\QA\TestDirector\TD_SL_US>

TAR# RAZBK8KJ4/ 11205

Unit cost incorrect in PLU item report If an item has a unit cost defined, the PLU item report displays it incorrectly. The decimal position for unit cost appears to be shifted 1 place to the left

TAR# 239164

Customer selects a Speed Index of "Report Code" in the PLU Movement Screen and saves his criteria to a Configuration File.  When that saved Configuration File is Loaded, the Speed Index has changed.  It may become either "UPC Code" or "Department".  If the same saved configuration file is loaded again and again, the Speed Index will keep changing to either "UPC Code" or "Department". ]Additional Notes -- Found out this problem also involves the "Sort By" field.  It is also not being saved correctly..... The "Sort Order" field appears to be working fine. After a saved configuration file is LOAD'ed, the Sort By field changes from REVENUE to QUANTITY.   If the Sort By field was QUANTITY, it changes to NONE.  If the Sort By field was NONE, it changes to QUANTITY.]

When in Direct Item Maintenance, if  put in a value for  Limited Quantity, say the number '3', then put in a price for  "LMT.QTY/PRICE", hit tab or ENTER, the Limited Quantity changes to the value of zero instead of the '3' that I was entered   When you are entering a limited quantity and a limited price you enter the quantity and then move on to the price, as soon as you enter the price it removed the quantity and you must enter that quantity a second time. After setting the quantity a 2nd time, it stays on the item.

While in CREATE/EDIT Batch, Under the Header Date tab,  enter a START DATE for the batch, hit ENTER or Tab and it highlights UPC. It should go to the Header End Date. Also, when tabbing through this same tab, it will highlight - Batch Type, Batch Description, Batch Action, but not HEADER START DATE.

This is with ENHANCED PRICE MANAGEMENT turned on.                 

STANDARD BATCHING, the message   ""Item ####### has not been added to the batch, Do you wish to add it now", which it should, but if  hit NO, it saves it to the batch anyway.

1.       Create a Batch

2.       Add a UPC and SAVE it                

3.       ENTER another UPC, hit ENTER, brings in the UPC and highlights the UPC                 

4.       ENTER another UPC, hit ENTER and I am not prompted "Item ####### has not been added to the batch, Do you wish to add it  now."                  

5.        ENTER several UPC's this way, hit BATCHLIST, it shows the first UPC I saved and it shows the last UPCI entered            (even though I did not SAVE this item). If  go back into the  batch all the items I entered (without saving) are still                   there.   

TAR# RAZBLQ56N/ 25090

When item modified by batch - message field appears in item record "This item modified by Lnnnnn". Message appears at             bottom of item record in Direct Item Maintenance between the Delete and Lock Tab buttons.  Even though the batch is deleted or the item is manually modified - the message remains forever.   If the item is then updated thru Direct Item Maintenance - this message should go away.

Entering a Not Found Item in a batch causes ON ADD to go away.

 When creating a Batch the customer enters the first Item number in the batch, then clicks on Ad Level 1 and ON ADD will display in RED next to the Ad Level. They enter the sale price and save it and the Base Item Price doesn't change, which is correct. Then they enter the next item number they want to add to the batch and the ON ADD flag is still there in red. It should stay on for all items that are added to the batch. But if they enter a NOT FOUND Item Number and it displays, Do you wish to add this item to the batch? and they click on NO. And then they enter the next item number they want to add to the batch, the ON ADD flag is now gone. So each price there after that is entered changes the Base Item Price as well. In the Backoffice Control file these three options are set to YES:USE ENHANCED BATCHINGBATCH ITEMS FOLLOW HEADER DATEALLOW PRICE HOLD DOWN

Byte 69 should be either a 0 or 1 but is a null after creating a batch.

Scenario:

1.       Select Create/Edit a batch from the menu.

2.       Create a new batch and put at least one item in the batch and save.

3.       Use a Btrieve file viewer to look at the batch header entry for this batch in gr2headr.btr.

Expected Results: 0

Actual Results: null

When building an ad batch and setting a sale price on an item the items base price should remain what it was before going on sale. However, the base price is getting changed to the sale price, therefore, when coming "off sale" the item will stay at the sale price unless manually  corrected at store level.

 Scenario:

1.       regular price of item is 1.99

2.       item goes on sale for 1.19 for ad week of 4/18 - 4/24.

Expected Results: Item should come off sale to 1.99

Actual Results: Item comes off sale to 1.19

When ad batches are supposed to come off sale and a stage has been run those items do not always appear in the current items to apply batch. It may take 2 or 3 stages before those items get included in the current items to apply batch and then come off sale.

 Scenario:

1.       There is an ad batch dated 4/18 - 4/24

2.        It is 4/25 and I activate batches 

3.       Current Items to Apply does not include ad batch items

Expected Results: All items dated to come off 4/24 should be included Actual Results:Only some of items going on are included none coming off

When creating a batch you only need to put 1 item that is linked to like code to have the rest of the items linked to that code change. When you do this, however, only that item in the batch will have the modified by batch option updated in item maintenance. All other items will either not have anything or have the last batch number that affected them.

Scenario:

1.       Item is linked to like code #1

2.       All items with like code #1 go  onsale for .79

3.       I only put upc #1 in batch at .79

4.       I activate the batch and all items go to .79

5.       In item maintenance only upc #1 says modified by batch #1

Expected Results: All items with like code should have modified by batch #1

Actual Results: Only upc #1 has the description all other upc's do not have any description

When adding an item to a batch and clicking the price mode button it prompts you to save the item before continuing even though you have not made any changes to the item yet.

Scenario:

1.       Create a new batch

2.       Type in UPC number and hit enter

3.       Click on price mode

4.       It asks you to save UPC before continuing

Expected Results:  It should just go into price mode without saving anything since you haven't made any changes

Actual Results: It makes you save before it will take you into price mode.

SM2BAPLY.EXE

An item that does not have an ad flag enabled on it is then activated from a batch and when you ring the item it shows You Saved Amounts on the receipt

Scenario:

1.       Put an item in a Permanent batch (using standard batching)

2.       Activate that batch

3.       Ring Item on register

4.       Finalize the sale

Expected Results:  there should be no you saved amount because this was a permanent price change not a temporary one which are the only ones that should show a savings amount

Actual Results: You are seeing a �you saved� amount that reflects the item price. This is because when the batch applies it is not updating the base price of the item to the new price.

File Spec Change

Need to change RecordCount field in Batch Headers to LJS (Left Justified Space filled)

Scenario:

1.  Due to the way the Batch Header RecordCount is updated it is necessary to format it as LJS instead of RJ0.

SM2ITEM.EXE

When editing the Batch Header Start Date and End Date the Item Start Date and End Date are recorded incorrectly

SM2BAPLY.EXE

In current items to apply batch you can have the same item in twice with 2 different prices due to like codes not updating

Scenario:

1.       Put an item into a batch at any price as long as it is linked to a like code

2.       Put another item into a second batch at a different price that is linked to the same like code

3.       Stage all batches

Expected Results: The items linked to the like code should appear only once and at the LOWEST PRICE

SM2BAPLY.EXE, SM2BATCH.EXE & SM2ITEM.EXE

Bottle link is deleted when items go off sale

Scenario:

1.       create a batch with items that have bottle links

2.       activate the batch

3.       activate the off sale for the batch

Expected Results: item should remain on bottle link

Actual Results: items bottle link is removed

SM2ITEM.EXE

Change an item in Direct Item Maintenance to a Scale Item -  then hit SAVE.  Then ring that item at the POS and get, "System Error - The following error has occurred and has been logged in REGLOG.001, (11) Division by Zero".  What makes this peculiar is that if  click on NEXT/PREVIOUS or EXIT in Direct Item Maintenance, a message states, "Item has changed, would you like to save?".  As if  never saved it before. 

SM2BAPLY.EXE

When a customer deleted an active batch the system should set the end data of the items to today minus one. Then the customer should be able to do a stage and have those items come off sale. This is not happening. The items are staying on sale unless manually being changed.

Scenario:

1.       item is on sale for week of 4/18 - 4/24 for 1.99 its base price was

2.       292. batch gets deleted on 4/223.

Expected Results: Item should stay at 1.99 until a stage was performed and then should be 2.29

Actual Results: Item remains at 1.99 permanently until manually being changed by personnel

SM2PDIMR.EXE

When running a PLU movement report if an item has a quantity sold but no revenue it will not show up on the report unless you include zero movers