Enhancement or Fault Number

Item  Description

WD4449

WD 4466

Note: NT Operating System Only - Win2000 works correctly.

WD 4778

If you have an item that is priced as each in the PLU Record, and the cashier presses 4 and then scans the item, the Winpos does NOT generate an error, scans only one item and the other 3 are never rang in. In V7.6 DOS, if you try this, you get a red system box that displays "QTY Key Not Pressed". We need this in Winpos to prevent free merchandise being given.

The Problem :If you have a PLU number set up as check fee and the same PLU number set up as a Single Item Promotion/Reduction - Winpos generates POSW32 error and closes application.

 ___________

Scenario:

1. Setup check fee table with PLU - PLU is 3.00

2. Setup Check Tender to be attached to the Check Fee Table.

3. Setup Single Item Promotion/Reduction with same PLU with minimum purchase of 15.00

4. Ring in Sales, tender with Check, Winpos generates posw32.exe error.

Expected Results: Customer wants to give his customers the check fee back if they spend 15.00 or more.

Actual Results: posw32 error is generated closing the winpos application.

WD 4792

The Problem :When you do manual weight , lb or kg symbols must be lower case

 ___________

Scenario:

1. Cashier presses the Weight/Scale key

2. ON Cashier display shows 500 LB or 500 Kg

Expected Results: Should shows 500lb or 500kg  

Actual Results: on cashier display shows 500\LB or 500\Kg

Operating System: Win 2000 Server SP2

WD 4830

Save a transaction with an item that is not taxable. Some time before the transaction is recalled, a tax is placed on the item in the item record. When you recall the transaction later, it is recalled an immediately voided. This item is also FS item.

 ___________

Scenario:

1. Create a PLU Item for 15.99 with a Frequent Shopper Discount of 3.00, No Tax.

2. Scan the item, scan the FS Card and Save Transaction.

3. Go into PLU Maintenance and add a Tax Flag to that item.

4. Recall the transaction at the lane. It is recalled and immediately voided.

Expected Results: Recall the transaction and add tax in where needed. Would most likely alter the amount due by the tax percent added to the item.  

Actual Results: The recalled transaction is voided and the amount due is LESS than it was when it was saved.

WD 4839

Bar code attached to target message does not print with the Epson 6000 printer

 ___________

Scenario:

1. Create Order/Level promotion (see attached file Target Message.doc for screen example)

2. Add template OEMMS12345 to existing template file or use the attached file (template.zip)

3. Connect Axiohm 7156 printer to TP2K

4. Ring order using department attached to promotion from step #1 above

5. Receipt will print message plus bar code

6. Remove the Axiohm 7156 printer and replace with an Epson H6000

7. Exit  WinPos on post, make change to post configuration to accept Epson H6000 printer, re-start WinPos

8. Ring order using department attached to promotion from step #1 above

9. Receipt will print message minus bar code

10. Ring any order and perform a save/recall and note that the Epson H6000 can print bar codes

The current ISS45 implementation of Charge Posting, requires the cashier to start the transaction as a charge posting transaction. If this occurs, then the transaction will be tax exempt automatically. This is fine if the cashier knows the order is going to be a tax exempt order, and/or she knows that it is going to be a charge posting order.Many times this is not the case. Usually, the cashier doesn't know how the order is going to be paid for until the total key is pressed and she announces the total to the customer. 

We need the system to access the  A/R system during the ISS45 tendering process and look for a tax exempt status flag. If this flag is set to yes, we need the ISS45 system to automatically reduce the sales taxes on all appropriate items, just as if the cashier had pressed the tax exempt key on the keyboard.

:Bashas' has discovered that if you enter a quantity, say 3, and forget to depress the X's key, only one item rings up.  In the older versions of software, like the dos version, the cashier would get an error.  This way she knew that she forgot to depress the X key.  I checked the control checks and could not find anything that relates to this situation.

Note: Same as WD 4478

PSI - When the system is set up on the ISS45 lanes to print vendor coupons with barcodes and logos - the coupons are correct. However, on the self-checkout lanes the coupons print with bar codes and no logos.

 ___________

Scenario:

1.PSI self-checkout - set up parms to print vendor coupons at end of order

2.Notice that the coupon prints with a scannable barcode but does not have the logo

3.NOTE: IBM has changes to do in their DLL along with this change to ISS45.

Ver 7.0.9 you cannot use the * function to expand the suppressed code.

CATEGORY: Plu Main.

 ___________

Scenario:

1. Plu Main. 2. Press  Insert 3 Press * 4 When you  press *  5 It Beep

Expected Results: *0491320 which should expand to 4900000132.  

Cashier display does not include the lb symbol next to the weight.

 ___________

Scenario:

1. On any post with a scale place a weight on the scale

2. The cashier display will show the weight but the lb symbol will not be displayed

    (lower left corner of display)

3. The stat Virginia Weights & Measures is requiring this

4. NOTE: The customer display does show the lb next to the weight

5. NOTE: This happens on both single and dual display posts  

Expected Results: Cashier display will show the lb symbol next to the weight

Credit card return doubles amount of return

 ___________

Scenario:

1. Perform a merchandise return (say for something that is spoiled) for $4.00

2. The item had been purchased on a credit card so the customer wants a return on that credit card

3. Depress total and then select EFT

4. Slide the credit card, say OK to the amount ($4.00) and complete the transaction

5. When the transaction is finalized the amount will read $8.00 (double the amount)

6. Using 709_60 and Microtrax 813.1.0

7. See attached log files and copy of receipt  

Garbage in ESL file

 ___________

Scenario:

1. Delete the ESL (2) files in C:\PCMASTER\SEQ

2. Q-Empty file # 105

3. Open PLU Maintenance (1,4,1) and adjust the item's ESL listing (F3)

4. Save the changes (F2, F2)

5. Open C:\PCMASTER\SEQ and wait for the ESL.001 file to update

6. Open the ESL.001 file with Notepad and verify the data against the ESL listing in PLU Maintenance  

Expected Results: ESL.001 file and PLU Maintenance match data

Actual Results: ESL.001 file has garbage listed in the ESL.001 file which does not match what was inputted into the PLU