ISS45 Version 7.1.2.1-050 Release Table

Enhancement or Fault Number	Item Description
New Feature	New Software Developer Kit (SDK) - press the hook function key in NO SALE mode - before items are rung up while in idle mode. Because WinEPS does a ResetScat twice - the second call was resetting everything that had been done in the hook. Needed to change the status from NO_SALE to SALE mode after performing hook functions.
New Feature	Add the support of velocity codes for ECC (like V8) in version 7
New Feature	FSA � add support for the government Flexible Spending Account for Pharmacy items
New Feature	Modify the ECC decline receipt to retrieve from WinEPS the verbiage for the reason for the decline to support NOVA ECC decline printing for customers
New Feature	Add support for EBT/WIC Texas and New Mexico and complete level 1 certification with USDA
WD 7820	When using PSC OPOS scanner/scale the weight is not displayed correctly on the TeamPoS Scenario: 1. when you are signed on the scale should display zeros it is not 2. put something on the scale it is not reading the correct weight.
WD 9350	The member card in the system and Frequent Shopper Enhanced type 2 is set. When you ring a 2nd, 3rd and so on of produce like #4011 bananas, you will get a message of invalid card type displayed before the item rings up. Scenario: - Using U-Scan release 39 and 8.1.2.0-050. - Set Store\POST\Monetary\frequent shopper\frequent shopper mode to Type 2. - Set Store\POST\operational\member card\member card\member card in system to Yes. - Start a U-Scan customer order by touching "press here to start" - Touch "produce\bulk\bakery" - key 4011 done on the keypad - put the item on the scale so it rings up -----At this point the first #4011 rings up ok - Touch "produce\bulk\bakery" - key 4011 done on the keypad - put the item on the scale so it rings up -----At this point you will get invalid card type then the item rings up - this happens on all the following rings for 4011. Expected Results: the 4 digit produce should not be trying to use card ranges Actual Results: invalid card range on 2nd, 3rd and so forth for 4 digit plus like 4011 bananas
WD 9396 WD 9397	V7 Parameter 6,1,2,1,1 #2 Open drawer in Training Mode is not checked. The cash drawers that are using OPOS are popping open when ringing training sales. This is using OPOS when the drawer is connected to the printer or using OPOS when the cash drawer is connected to the POST. Scenario: 1. Make sure parameter 6,1,2,1,1 #2 Open drawer in Training Mode is not checked. In the WinPoS.ini file have one of there different configurations depending on where the cash drawer is connected **Config #1 cash drawer on TPG A776 printer and using TPG OPOS WinPoS.ini lines to insert OposDrawer=Yes DefaultDrawerName=A776-1 Set POST configuration 1 Drawer in use checked connected to printer checked Config #2 cash drawer on Epson 6000II printer and using Epson OPOS WinPoS.ini lines to insert OposDrawer=Yes DefaultDrawerName=TM-H6000II Set POST configuration 1 Drawer in use checked connected to printer checked Config #3 cash drawer on TP3000XL drawer connection using Fujitsu OPOS WinPoS.ini lines to insert OposDrawer=Yes DefaultDrawerName=TP3K_CD1 **Set POST configuration 1 Drawer in use checked Expected Results: When using OPOS for the cash drawer, it should not be popping open in training mode Actual Results: If using OPOS for the cash drawer, the drawer is popping open in training mode
WD 9486	Create an item for 6.00 Put item on Promotion/OFFER Limited Quantity 2.00 OFF Buy 0 at Regular Price Buy 2 at Discount Price Meaning you get 2 of them for 4.00, thereafter 6.00. Ring up the item 6 times. You get 4.00 4.00 6.00 6.00 6.00 6.00 Error Correct 1 item - it takes off 4.00 (wrong) Void another one - it takes off 4.00 (wrong) Void one more - it takes off 12.00 and adds back 4.00 (wrong again)
WD 9749	Additional internal logging has been added for the WinPoS for development and support assistance for tracking potential issues.
WD 9976	Gift card activation templates are not printing correctly - getting double logo and cut in the wrong place.
WD 9996	The cashier # 101 has no privileges at all checked and the Parameter 6-1-2-1-3 #10 has all 1 - 8 Supervisor privileges checked. The system is still using the cashier number for the approval without showing a popup. Scenario: TAC sequence for check is 9,8,5,6,T,7,S,W,G,H,> My cashier 101 (V7 1,2,1 Cashier maintenance) has no privileges checked at all Parameter 6-1-2-1-3 #10 has all 1 - 8 Supervisor privileges checked Ring $7.88 to the Grocery Department Hit Total or Enter to get to Tender mode Key 7.88 Check Tender Prompt on my OPOS A776 printer is Check Account Reading Put check into printer to read MICR Remove check Prompt for enter check type Select Business/Payroll NOTE: At this point the manager ID pop up should happen but the journal file in OpenEPS shows 101 used automatically. Prompt for enter ID Select Driver's License Prompt for enter ID number Enter a number Prompt for state code Enter CA or anything else Prompt for check printing (front) Insert check Prompt for check printing (endorse) Insert check Prompt for verify signature Select Yes Expected Results: Manager ID pop up should happen for TAC T Actual Results: POST using cashier number for approval even though they do not have the privilege.


	Name of Link:	CD Only
	Code Distribution:	This release will be automatically applied to stores with the StoreNext Code Distribution System.
	Posting Date:	07-Dec-07
ISS45 Version 7.1.2.1-050 Release Table Last updated December 7, 2007 See the Release Table below for a description of this planned release. This table below describes the current plan for the new features and faults to be addressed in this scheduled software release.
Printing Instructions: many browsers do not support correct color and format printing directly from the Web. For best results, with your cursor highlight the section of the table you wish to print and copy to the clipboard. Then paste from the clipboard into a blank Word document and print the Word document to a color printer.