ISS45 8.1.7.0-160 Release Table


	Name of Link:	FTP Site for 8170-160 FTP Site for Fuel 8170-130
	Code Distribution:	This release can now be applied to stores via the Retalix Code Distribution System.
	Posting Date:	February 6, 2015

ISS45 Version 8.1.7.0-160 Release Table

Last updated February 6, 2015

NOTE: ISS45 8.1.7.0-150 and later require the ProLogic/YOU Tech/S&H/GreenPoints option to be set on the HASP keys. ISS45 will not work with Prologic/etc. without HASP key support.

NOTE: ISS45 8.1.7.0-150 and later require the Self-Checkout option to be set on the HASP keys. The ISS45 system will not work with any self-checkout system without HASP key support.

NOTE: ISS45 8.1.7.0-140 requires LPE Release 10.1.187, which is provided with the 8.1.7.0-140 ISS45 patch install.

NOTE: ISS45 8.1.7.0-130 and later require Fuel release 8170-130 (or later). The Fuel release is available by clicking above or from the Fuel Maintenance Page.

NOTE: ISS45 8.1.6.0-100 and later require the Loyalty option to be set on the HASP keys. The ISS45 system will not work with Retalix Loyalty without HASP key support.

The table below provides descriptions of the new features provided and faults addressed in this release. Information prior to this software release is provided in order to assist dealers in their planning, and while they are not commitments, this list represents StoreNext's best view at time of posting regarding highly likely new feature content and faults most likely to be addressed.

Printing Instructions: some browsers may not support correct color and format printing directly from the Web. You may also highlight the section of the table you wish to print, copy to the clipboard, then paste from the clipboard into a blank word processing document and ouput to a color printer.

Enhancement or Fault Number	Item Description
New Feature	Support for Check Flip on the NCR 7167 and 7168 Printers. (CRD 418396 / FSD 418396)
WD 412689	Prepays not finalizing (Prepay sales not being closed in t-log), since upgrading to 8.1.7.0-130.
WD 415893	Ocassionally Winpos crashes to desktop when cashier presses "enter", with the introduction of the Consumer ID button. Uses Inmar\MDot . Used to only enter phone number, but now using the Consumer ID.
WD 419209	Points Spend promotion causes a loop of redeeming after 3 redeems in one transaction. If cashier redeems three points spend promotions in one transaction, it will cause it to go into a loop after the third time. If cashier clears out of it, it will not allow it to redeem for the remainder of the transaction. Scenario: 1. Create a Points Earned promotion and redeem it to a member account in order to build points 2. Create a "Points Redeem" promotion like the one attached 3. Scan the item and select the points to redeem 4. Scan the item a second and third time, redeeming points each time. Expected Results: On the third redemption, it should go back into the order as normal. Actual Results: It will continue to present the cashier with the "Points Redemption" screen. After you clear out of the screen, it will not allow you to redeem the points again.
WD 419668	Loyalty Analytics balancing issue when a transaction includes a media exchange -- Tlog OpCode 5 - Total Sale Amount and XML Messages to Loyalty should not include the media exchange amount. Scenario #1: 1. Ring a Qty of 10 for PLU 1023 2. Tender $20.00 cash Scenario #2 1. Ring a QTY of 1 for PLU 1024 2. Tender $10.00 cash Scenario #3 1. Ring a Qty of 10 for PLU 1023 2. Void the transaction Scenario #4 1. Ring a Qty of 1 for PLU 1024 2. Ring a Qty of 1 for PLU 1023 3. Void the PLU 1024 4. Tender the Transaction for $.49 cash Run the Store Balance Report. Gather the transact.qdx Gather the promxxxxxx.xml files and all other Loyalty MSG files etc. Gather the S0000.... files Expected Results: Tlog OpCode 5 - Total Sale Amount and XML Messages to Loyalty should not include the media exchange amount. Acutal Results: Tlog OpCode 5 - Total Sale Amount and XML Messages to Loyalty do include the media exchange amount.
WD 419748	Problem printing Signature Capture from EJ on Win 7 enviroment causes print window to go behind other windows and can't be closed. Printing Signature Cap. from EJ, in a Win 7 enviroment causes the print window to be placed where it can't be closed without exiting out to have access to task bar, and closing the window from there. Scenario: 1. Open EJ, chose Date and open file 2. Zoom in on transaction 3. Click on "display signature" 4. Click on 'Preview" 5. Click on print Expected Results: The window should stay on top where it can be closed once the print funtion is compleated. Actual Results: The window is dropped behind other windows, and user has to exit to where the task bar is, and then close the window, and begin process all over again.
WD 419772	Using ECCA templates to capture new customer data the store is not able to enter any information in the Name field at the register. Stores are using ECCA templates to capture new customer data. The store is not able to enter any information in the Name field at the register. The subsequent address and Tel umber fields are fine. The stores have been recently upgraded ISS45 V8. ISS45 Version 8.07.00.090. 17 Stores are being affected by this issue. Using 92U keyboards Scenario: 1. Setup ECCA 2. Try to type number/character in name field Expected Results: Able to type alpha numeric characters Actual Results: Unable to type anything
WD 420978	Prevent tender completion if POS experiences an exception violation due to function call mismatch between MTX_POS.dll and MTX_EPS.dll files.
WD 425920	No "EFT Port" setting in POS Config can cause POS to complete EFT transaction with no authorization actually taking place. Scenario: In POS Configuration, set EFT Port to None 1. Sell some items 2. Pay with an EFT tender Expected Results: POS will not process the EFT tender. Actual Results: POS processes the EFT tender as a non-EFT tender. No communication takes place to MTX and ticket completes as if tender was approved.