| ISS45 | ISS45 Release Table |
|
|
| Name of Link: | ||
| Code Distribution: |
This release can now be applied to stores via the Retalix Code Distribution System. | |
| Posting Date: |
Oct 7, 2015 |
ISS45 Version 8.1.8.0-070 Release Table
Last updated October 6, 2015
|
NOTE: ISS45 8.1.7.0-150 and later require the ProLogic/YOU Tech/S&H/GreenPoints option to be set on the HASP keys. ISS45 will not work with Prologic/etc. without HASP key support. NOTE: ISS45 8.1.7.0-150 and later require the Self-Checkout option to be set on the HASP keys. The ISS45 system will not work with any self-checkout system without HASP key support. The table below provides descriptions of the new features provided and faults addressed in this release. Information prior to this software release is provided in order to assist dealers in their planning, and while they are not commitments, this list represents StoreNext's best view at time of posting regarding highly likely new feature content and faults most likely to be addressed. Printing Instructions: some browsers may not support correct color and format printing directly from the Web. You may also highlight the section of the table you wish to print, copy to the clipboard, then paste from the clipboard into a blank word processing document and ouput to a color printer.
|
|
Enhancement or Fault Number |
Item Description |
| New Feature |
Support Alternate Loyalty ID at the PIN Pad with Encore 700 Fuel. (ER F03231501 / CRD 438044 / FSD 438044) |
| New Feature |
Expose Alt-ID Entry at the PIN Pad to the ISS45 SDK for Loyalty Lane. Requires updated SDK. (CRD 439907 / FSD 439907) |
| New Feature |
Support Alternate ID entry at the PIN Pad for SSCO and U-SCan (CRD 440165 / FSD 440165) |
| New Feature |
Display S&H/ProLogic-ProLogic Coupon on the CID as soon as it is received. (CRD 441033 / FSD 441033) |
| Updated Feature |
Support of Windows Updates Windows updates were applied 9/22/2015 to the following system types MFS1 - Nobilis - Windows 7 Profession SP1 POS - Fujitsu 3K - WePOS. |
| WD 431098 | Datalogic 9800i Scanner/Scale losing connectiion with ISS45 when ISS45 signs on when the Scanner is in Sleep Mode. |
| WD 433029 |
SmartCard WIC: Get Error 76 Path not found when State Maintenance is set up
incorrectly. Problem is the will stop the EOD until cleared. If the State Maintenance HTTP communication username or password is set incorrectly and error 76 will occur. When the HTTP is called at EOD, the error is logged in the HTTP log but will not allow the EOD to finish until the error is cleared. Scenario: 1. Set State Maintenance password incorrect 2. Ring SmartCard WIC sale 3. Run EOD Expected Results: Log the error and by pass during EOD. Actual Results: Get Error 76 Path not found and stops EOD until error is cleared. |
| WD 440064 |
SSCO: Atlernate Cusotmer ID (phone # lookup) on PIN Pad does not work with
Loyalty. Using Retalix Loyalty and entering Alternate ID at PIN Pad will not return a customer number. Scanning Customer card will work at PIN Pad. Manual entry of alternate customer ID will not. Scenario: 1. Set up system to use Retalix Loyalty 2. Use customer card with a Phone # look up 3. Scan first item 4. At PIN Pad, enter the customer 10 digit phone # 5. Scan second item Expected Results: System should respond with "Frequent Shopper Activated" message. Actual Results: System does not respond with the Customer linked to the Phone # entered. |
| WD 440065 |
U-SCAN: Atlernate Cusotmer ID (phone # lookup) on PIN Pad does not work with
Loyalty. Using Retalix Loyalty and entering Alternate ID at PIN Pad will not return a customer number. Scanning Customer card will work at PIN Pad. Manual entry of alternate customer ID will not. Scenario: 1. Set up system to use Retalix Loyalty 2. Use customer card with a Phone # look up 3. Scan first item 4. At PIN Pad, enter the customer 10 digit phone # 5. Scan second item Expected Results: System should respond with "Frequent Shopper Activated" message. Actual Results: System does not respond with the Customer linked to the Phone # entered. |
| WD 440157 |
SSCO: Non-Retalix Loyalty Alternate ID on the PIN Pad causes the second item
to skip needing bagged. Using Member cards from ISS45 with a Alternate ID and entering at the PIN Pad. Scenario: 1. Set up Member Card in ISS45 2. Set up Alternate ID through PIN Pad 3. Scan item 4. Enter Alternate ID through PIN Pad 5. Scan second item Expected Results: Should allow customer to bag second item scanned. Actual Results: Second item comes back with Item Not bagged and will give security message if customer tries to bag the item. |
| WD 440159 |
U-SCAN: Non-Retalix Loyalty Alternate ID on the PIN Pad causes the second
item to skip needing bagged. Using Member cards from ISS45 with a Alternate ID and entering at the PIN Pad. Scenario: 1. Set up Member Card in ISS45 2. Set up Alternate ID through PIN Pad 3. Scan item 4. Enter Alternate ID through PIN Pad 5. Scan second item Expected Results: Should allow customer to bag second item scanned. Actual Results: Second item comes back with Item Not bagged and will give security message if customer tries to bag the item. |
| WD 440161 |
SSCO: Non-Retalix Loyalty using Member Cards in ISS45 gets out of sync with
PIN Pad if Alternate ID is entered at PIN Pad. Using Member cards from ISS45 with a Alternate ID and entering at the PIN Pad. Scenario: 1. Set up Member Card in ISS45 2. Set up Alternate ID through PIN Pad 3. Scan item 4. Enter Alternate ID through PIN Pad 5. Scan second item 6. Press Finish and Pay 7. Select Credit as Payment Type Expected Results: PIN Pad and SSCO should stay in sync and sale should finish. Actual Results: PIN Pad and SSCO are out of sync sale never finishes. |
| WD 440163 |
U-SCAN: Non-Retalix Loyalty using Member Cards in ISS45 gets out of sync
with PIN Pad if Alternate ID is entered at PIN Pad. Using Member cards from ISS45 with a Alternate ID and entering at the PIN Pad. Scenario: 1. Set up Member Card in ISS45 2. Set up Alternate ID through PIN Pad 3. Scan item 4. Enter Alternate ID through PIN Pad 5. Scan second item 6. Press Finish and Pay 7. Select Credit as Payment Type Expected Results: PIN Pad and SSCO should stay in sync and sale should finish. Actual Results: PIN Pad and SSCO are out of sync sale never finishes. |
| WD 441254 |
POS - Member Card Entry on Pin Pad is Truncating the last digit of the
Member Number and "out of sync" issue at PIN Pad. It was thought that the only way to enter a Phone Number or ALT + ID at the PINPAD was with the new options "Secondary ID Only", or "Secondary ID OR PAYMENT". However, customer should be able to use the "Member Card or Secondary ID" option to do the following: -Customer "swipes" a member card at the PINPAD OR -Customer "manually" enters a 10-digit member card for Loyalty What is currently happening is when I swipe Member Card #42030000001 on the PINPAD, it is cutting off the ‘1’. Cashier can still swipe the Member Card at the POS. Pin Pad type used is L5300 |
| WD 441720 |
Issue with redeeming RetailOne digital coupons in a suspended transaction. Scenario: 1. Ring up items 2. Enter Loyalty number 3. Hit total ( digital coupon takes effect.) 4. back out of total and save transaction 5.Then recall the transaction 6. Total it out with the digital coupon attached Expected Results: Should send up the digital coupon to the NCR cloud and "un-clip" it from the customers account. Actual Results: Doesn't send the digital coupon information to the NCR cloud so it doesn't "un-clip" from the customers account. |
| WD 442795 |
Price Inquiry on Weighted Item with Split Price displays Incorrectly on
Winpos. PLU 4011 for example, Weighted Item Price 1.00 Qty 3 - meaning 3lbs for 1.00 At the POS, place item on the scale and perform (912) Price Inquiry on the POS, enter the PLU number and press Enter. Price shown is divided by the Qty Expected Results: Price of the item should be shown as is in the item file. Acual Results: Price shown is divided by the Qty - cashiers and customers are confused. |
| WD 442857 | TFServer does not handle zipped XML in tlog. |
| WD 442861 |
SCO will get out of synch with POS if pinpad-entered alternate ID is not
cofirmed as member card. Scenario: Alt ID is valid but looked-up card number fails because card ranges are not set up correctly. 1. Scan item at SCO 2. Enter valid alternate ID on pinpad 3.Scan second item Expected Results: Frequent Shopper message Actual Results: No Frequent Shopper message, out of synch |
