Enhancement or Fault Number

Item  Description

WD 280569

U-SCAN: Scanning an invalid coupon or expired coupon in direct mode will not allow any item or coupon scanned in direct mode. If the attendant need to clear an error in direct mode and then scans an invalid or expired coupon or an item that doesn't work, nothing else will scan in direct mode.

Scenario:
1. Scan some items
2. Go to direct mode scan an invalid or expired coupon
3. Scan a valid item or coupon

Expected Results: Cashier should be allowed to scan another coupon or item in direct mode.

Actual Results: Nothing will scan, pressing clear will not allow a scan.

WD 307486

ECC transaction is no longer printing customer 2nd receipt since upgrade from 2.07.XX to 2..08.00-050.

Scenario:
1. Use attach control and mediacfg files.
2. Test with 2.07.02.30
3. Test with 2.08.00-050

Expected Results:2nd receipt prints.

Actual Results:2nd receipt does not print.

WD 311140

Databar coupons not following "No Cpn Multiple" flag in item maintenance. When the no coupon multiple flag is enable in item maintenance databar coupons still double.

WD 313744

When the register is rebooted, cold or properly, and ScanMaster comes to the closed screen the 32 Key Keyboard no longer responds

Scenario:
1. 2.8.0-50 - reboot register
2.at closed screen hit sign on button on 32 key keyboard

Expected Results: sign on

Actual Results: sign on does not occur

WD 316667

When a shorter than check length piece of paper is used instead of check for printing purposes a clear to continue loop is created on the register that required register to be rebooted to actually continue.

Must be a serial printer.

Scenario: Fujitsu 2K with Epson H6000III printer, 2.8.0-50
1. ring up order and tender check amount
2.micr check
3.when asked to print front of check hit enter
4.realize don't need to print front of check so use a shorter than check length piece of paper in printer and hit clear
5.printer prints
6. register shows remove doc
7. remove the paper
8. register says clear to continue

Expected Results: hit clear and continue

Actual Results: hit clear to continue loop, must reboot to actually continue.

WD 317386

When cashing a check if print signature slip option is yes under checks non-EFT found in the POS media cfg. the signature slip indicates that the tender type was charge. It also gives language at the bottom of the signature slip about the "card holder" that doesn't make sense when connected to a check cashing transaction.

Scenario: 2.8.0-60, POS media cfg. Checks Non-EFT Print Signature Slip set to Yes
1.customer bring payroll check to register
2.cashier presses - down arrow, cash check, payroll check, enters amount,
3. asked to put check in printer for MICR read, asked to put check in printer to print endorsement
4. remove check and then receipt prints and signature slip prints

Expected Results: signature slip refers to tender type as Check

Actual Results: signature slip refers to tender type as Card and gives "Card Holder" statement at bottom.

WD 318315

Epson 6000III printer will lock up on endorsement
Scenario:
1.upgrade Fujitsu TP 3k terminal from 2.8.0.50 to 2.8.0.60
2.tender a check
3.enter check for endorsement

Expected Results: to finish endorsement without error
Actual Results: on last line of endorsement you will get printer error message in middle of screen, you can hit clear multiple times and transaction will finish but will never print last line of endorsement which includes the tender type and tender amount