Enhancement or Fault Number

Item  Description

New Feature

Software Support for the Fujitsu TP3600.

For the Fujitsu TP3600 support use U-Scan Image & Setup 89000633 (P4I-TP36PRO01)

New Feature

Modify DealerConfig for changing "EnableDoubleHandedScanning" "EnableThroughputScanning" options by using deviceconfig xml. 

Instead of importing registry files, run .bat files to enable/disable DoubleHandedScanning and ThroughputScanning options in DealerConfig.

(Tracker 45809)

New Feature

Using  Long Order box layout for Local Direct Mode.  Enabled the extended Local Direct Mode list box (no virtual keyboard is present in LDMode for this customer).

(Tracker 43360)

New Feature

Incorporate registry file configuration settings into Dealer Config. 

The following files have to be split because they contain device settings which have to be converted into XML format:

AtPos_SignPad_OFF.reg, AtPos_SignPad_ON.reg, AutoPilot_OFF.reg, AutoPilot_ON.reg, BDMonitorLevel_OFF.REG, BDMonitorLevel_ON.REG, DisableDoubleHandedSec.reg, DisableThroughputScanning.reg, EnableDoubleHandedSec.reg, EnableThroughputScanning.reg, FPCLIGHT.reg, PATLITE.reg, Topaz_SignPad_OFF.reg, Topaz_SignPad_ON.reg,

The following registry configuration files from the common group should be considered as well: BillDetector_OFF.reg, BillDetector_ON.reg, CpnDetector_OFF.reg, CpnDetector_ON.reg, LT_Bill_Denominations_1_5.REG  (Diebold), LT_Bill_Denominations_1_5_10.REG  (Diebold), LT_Bill_Denominations_1_5_20.REG  (Diebold), LT_Bill_Denominations_5_20.REG  (Diebold), LT_DelaRueBillDispenser_1_5_10.REG (NMD50), LT_DelaRueBillDispenser_1_5_20.REG (NMD50), Robot_4_Lanes.REG, Robot_6_Lanes.REG, Robot_USBCamera_OFF.reg, Robot_USBCamera_ON.reg, U-ScanBelt_OFF.reg, U-ScanBelt_ON.reg, Vision_OFF.REG, Vision_ON.REG

(Tracker 44764)

New Feature

Remove Opaque effect on Payment Icons START/CLOSED screen.  Remove the opacity effect from the payment icons used on the START/CLOSE screens to make them more apparent.

(Tracker 44820)

New Feature

Changes to EBT selection. The state of Wisconsin does not allow EBT Cash. Make a change in the dealer config, where you can choose whether you want an EBT button (which will bring up the subpage with EBT foodstamp and EBT cash options) or EBT Foodstamp (which will not bring you to a subpage but straight to the payment method instructions) on the payment selection screen.

(Tracker 45037)

Tracker 39532

Toggle security control barcode does not change background color right away on same screen.

Steps to Reproduce

1. Open Dealerconfig.exe.

2. Change backgroundcolor and Secdisabledbackgroundcolor in the configuration options.

3. Scan the toggle security barcode.

Actual Result: The toggle security barcode does not change the screen color. After enabling security you go to the next screen then its color changes.

Expected Result: The toggle security barcode should change the background color right away on the same screen.

Tracker 39690

Text appears in French in Maintenance Mode.

Steps to Reproduce

1. Open the Dealerconfig utility.

2. Change the currency type : US and Medialanguage selection: EnglishSpanish or English.

3. Restart the robot.

4. Now the robot is on US Installation setup.

5. Go to Maintenance Mode and observe the screen.

Actual Result: Text on the Maintenance Mode screen is in French, i.e. �MODE MAINTENANCE�.

Expected Result: Text on the Maintenance Mode screen should be in English, i.e.  �MAINTENANCE MODE�.

Tracker 45719

By default (American setup), after pressing the EBT button, the EBT Food and EBT Cash buttons are overlapped.

Steps to Reproduce

1. Install an American setup and restart the PC.

2. Run the U-Scan software.

3. Scan an item. Go to the payments screen and select EBT.

Actual Result: The EBT Food and EBT Cash buttons are overlapped.

Expected Result: The EBT Food and EBT Cash buttons should not be overlapped.

Tracker 45720

Tender layout in Dealer Config doesn't match tender layout on Payments screen.
Steps to Reproduce
Scan an item and go to the Payments screen.
Actual Result: The tender layout in Dealer Config doesn't match the tender layout on the Payments screen.
Expected Result: Tender layout in Dealer Config should match the tender layout on the Payments screen.

Tracker 45894

The audio in Spanish is not correct after pressing the button <<Frutas/Verduras/ Panader�a>>. 

Steps to Reproduce

1. Press Inicio.

2. Press <<Frutas/Verduras/ Panader�a>>.

3. The audio in Spanish is not correct.

Actual Result: Seleccione una pesta A y escoja un art�culo en la lista mostrada debajo.

Expected Result: Seleccione una pesta�a y escoja un art�culo en la lista mostrada debajo.

Tracker 45895

Spanish text is not correct. 

Steps to Reproduce

1. Press Inicio.

2. Press Frutas /Verduras /Panader�a.

3. Press Art�culo no encontrado.

Actual Result: The text in Spanish is �Escriba el nombre de su art�culo y selecci�nelo de la lista de art�culos monstrada abajo�.

Expected Result: The text in Spanish should be �Escriba el nombre de su art�culo y selecci�nelo de la lista de art�culos mostrada abajo�.

Tracker 45971

Use VNC version 1.24 instead of VNC 1.23.

Steps to Reproduce

1. Install U-Scan on the robot and cashier.

2. Restart the robot and cashier.

3. Start the U-Scan application on both stations.

Actual Result: The following error message appears on the screen: �Error signature AppName vncviewer.exe AppVer 1.23.0.0�.

Expected Result: No error should be displayed. Note: the same error is displayed on the robot and cashier.

 Tracker 46018

The behavior of DealerConfig is not consistent.

Steps to Reproduce

Scenarios #1 and #2 are not consistent.

Scenario #1

1) Open DealerConfig (Initial conditions: Currency type: US, MediaLanguage: EnglishSpanish).

2) Change Currency type to Canadian and exit.

3) Open DealerConfig.

Scenario #2

1) Open DealerConfig (Initial conditions: Currency type: Canadian, MediaLanguage: EnglishFrench).

2) Change Currency type to US and exit.

3) Open DealerConfig.

Actual Result

Scenario 1: Currency type: Canadian and MediaLanguage: EnglishFrench.

Scenario 1: Currency type: US and MediaLanguage: EnglishFrench.

Expected Result

Scenario 1: Currency type: Canadian. I don�t know if MediaLanguage should change (EnglishFrench is correct).

Sceanrio 2: Currency type: US. If MediaLanguage should change, then to be consistent with Scenario #1, the MediaLanguage should be  English or EnglishSpanish.

Tracker 46112

imgPayCashUnavailable is misaligned. 

Steps to Reproduce

1) Go to the registry and set up the following (HKEY_CURRENT_USER\Software\OptimalRobotics\Robot \ DisableAcceptorOnCashDeviceStatus=F).

2) Plug in all the cash devices. Start the Launchpad and unplug the cash devices again to create an offline situation for them.

3) Make sure that the unplugged devices are offline. The cash functions will not be available in the station.

4) Scan an item and go to the payments screen.

Actual Result: imgPayCashUnavailable is misaligned.

Expected Result: imgPayCashUnavailable should be at the correct location.

Tracker 46116

The cash and cash not available buttons are not synchronized.

Steps to Reproduce

1. Go to the registry and setup the following: ( HKEY_CURRENT_USER\Software\OptimalRobotics\Robot \ DisableAcceptorOnCashDeviceStatus=F).

2. Run DealerConfig.exe.

3. Remove the Cash button, remove the Credit button, put the Credit button where the Cash button was located and put the Cash button where the Credit button was located.

4. Save the tender layout and exit.

5. Plug all the cash devices. Start Launchpad. Unplug the cash devices again to create an offline situation for them.

6. Make sure that the unplugged devices are offline. The cash will not be available at the station.

7. Ring an item and go to the payments screen.

Actual Result: The �cash not available� button will be at the original location. The �cash� and �cash not available� buttons are not synchronized.

Expected Result: The �cash not available� button should be located at the new location. The �cash� and �cash not available� buttons should be synchronized."

Tracker 44385

20's missing from the U-Scan Cash Devices report.

Steps to Reproduce

Print the U-Scan Cash Devices report.

Actual Result: The 20's are missing from the Bill Count section for dispensed bills, even if 20's were dispensed during the day.

Expected Result: 20's should be displayed in the Bill Count section for dispensed bills.

 Tracker 45718

US multimedia is installed after selecting Canadian configuration.

Steps to Reproduce

1. Install a Canadian setup and restart the PC.

2. Run the U-Scan software.

Actual Result: The US multimedia is installed.

Expected Result: The Canadian multimedia should be installed.

 Tracker 45876

Changing the OnlyPressingButtonCanStartOrder in DealerConfig generates and error.

Steps to Reproduce

1. Run DealerConfig.exe.

2. Try to change the value for OnlyPressingButtonCanStartOrder.

Actual Result: An error message is generated >>> Property value is not valid. The system cannot find the file specified.

Expected Result: No error message should be generated.

Tracker 42743

Refactor GMM customer XML to meet the new panel structure and format implemented in the Genesis Media version 1.3.52 (revision 1.167).

Tracker 44763

Convert StoreNext custom set device settings from registry to xml format.

Tracker 45879

Signature Capture screen is not displayed in correct location.

Steps to Reproduce

1. Enable the Signature Capture device using Topaz_SignPad_ON.bat.

2. Run the U-Scan software.

3. Scan an item and pay with credit.

4. The customer will be instructed to use the signature capture device at the robot.

Actual Result: The signature capture screen is not located at the right place.

Expected Result: The signature capture screen should be located at the right place on the multimedia screen.